Eco-friendly plastic from cellulose and water

0

The newly produced bioplastic consists of “hydroplastic polymers”, which become soft and malleable on contact with water. Credit: K Zhang

Plastics offer many benefits to society and are widely used in our daily life: they are lightweight, cheap and adaptable. However, the production, processing and disposal of plastics are simply not sustainable, and pose a major global threat to the environment and human health. Eco-friendly processing of reusable and recyclable plastics derived from plant-based raw materials would be an ideal solution. So far, the technological challenges have proved too great. However, researchers at the University of Göttingen have now found a sustainable method—’hydrosetting’, which uses water at normal conditions—to process and reshape a new type of hydroplastic polymer called cellulose cinnamate (CCi). The research was published in Nature Sustainability.

Plastics are polymers, meaning that their molecular structure is built up from a large number of similar units bonded together. Currently, most plastics are manufactured using petrochemicals as raw materials, which is damaging to our environment to both extract and dispose of. In contrast, cellulose, which is the main constituent of plant cell walls, is the most abundant natural polymer on earth, constituting an almost inexhaustible source of raw material. By slightly modifying a very small portion of the chemistry of cellulose by introducing a “cinnamoyl” group, the researchers succeeded in making a specific CCi that is suitable for the formation of a new type of bioplastic with hydroplastic (ie soft and mouldable on contact with water) polymers.

This means that it can be molded using little more than water at everyday temperature and pressure. This unique method—known as hydrosetting—enabled the researchers to produce a variety of shapes simply by immersing the bioplastic in water and leaving it to dry in the air. The molded shapes kept their stability in the long-term and could be reshaped over and over again into a variety of 2D and 3D shapes. Although the plastic should not be used for direct contact with water—because it will lose its shape—it can hold water and be used in humid conditions. The CCi bioplastics showed high quality mechanical properties when compared with plastics that are currently widely used.

Eco-friendly plastic from cellulose and water
The hydrosetting process avoids expensive and complex machinery and harsh processing conditions. Credit: K Zhang

“Our research provides a feasible method to design other eco-friendly hydroplastics from renewable resources,” explains Professor Kai Zhang from the University of Göttingen. “This should open up new avenues of research, stimulating further exploration of other sustainable bioplastics with superior mechanical properties and new features.”

Eco-friendly plastic from cellulose and water
Bioplastics like this could be useful in many different situations, such as biology, electronics and medicine. Credit: K Zhang

The hydrosetting process avoids expensive and complex machinery and harsh processing conditions. This eco-friendly method highly simplifies plastics manufacture, making their processing and recycling more economical and sustainable. “This research offers tremendous potential for bioplastics like this to be applied in many different situations, such as biology, electronics and medicine,” says Zhang before adding: “In particular, the detrimental effects of plastics on the environment, which is damaging to all forms of life on earth, would be minimized by reusing hydroplastics with their unique features.”


Turning wood into plastic


More information:
Jiaxiu Wang et al, Hydroplastic polymers as eco-friendly hydrosetting plastics, Nature Sustainability (2021). DOI: 10.1038/s41893-021-00743-1

Provided by
University of Göttingen


Citation:
Eco-friendly plastic from cellulose and water (2021, July 22)
retrieved 22 July 2021
from https://phys.org/news/2021-07-eco-friendly-plastic-cellulose.html

This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no
part may be reproduced without the written permission. The content is provided for information purposes only.

FOLLOW US ON GOOGLE NEWS

 

Read original article here

Denial of responsibility! Gamers Greade is an automatic aggregator of the all world’s media. In each content, the hyperlink to the primary source is specified. All trademarks belong to their rightful owners, all materials to their authors. If you are the owner of the content and do not want us to publish your materials, please contact us by email – admin@gamersgrade.com. The content will be deleted within 24 hours.

Leave A Reply

Your email address will not be published.